Dump Truck
Dump Truck
| Engine | WD12.375 (Weichai Power)375HP |
| Type | Four-stroke, water-cooled, in-line, dry-liner, direct-injection |
| Max. Power | 276kw/2,200rpm |
| Max. Torque | 1,550N.M/1,200~1,600rpm |
| No. of Cylinder | 6 |
| Bore × Stroke | 126*155 |
| Displacement | 11.6 |
| Controller type | Mechanical |
| Air cleaner | Dry paper element |
Transmission Wheel and Tire
| Model | Eton Fuller 9JS165T Rim: 8.5-20 |
| Type | Mechanical (synchronizer) Tires: 12.00R20 |
| 1st | 12.65 |
| 2nd | 8.38 |
| 3rd | 6.22 |
| 4th | 4.57 |
| 5th | 3.40 |
| 6th | 2.46 |
| 7th | 1.83 |
| 8th | 1.34 |
| 9th | 1.00 |
| Reverse | 13.22 |
Axles
| Front | Stub axle with double T-cross section Capacity: 7,500KG |
| Rear | Double reduction with hub reduction and final drive ratio: 5, 73 Capacity: 13,000KG*2 |
Brake System
| Service | Full Air Brake, Dual circuit |
| Parking | Spring actuator at rear wheels |
| Auxiliary | exhaust brake |
Fuel Tank
Mounted on offside of the frame:
| Capacity | 350L |
| Material | Aluminum |
Steering
| Driving position | Left hand drive |
| Type | recirculation ball with integral power assisted by oil |
| Steering model | HITACH |
Suspension
| Front suspension | tapered leaf spring 9 semi-elliptic leaf spring |
| Rear suspension | tapered leaf spring 12 semi-elliptic leaf spring |
Clutch
| Type | Hydraulic control with air assisted |
| Plate diameter | dry single plate with diaphragm outside diameter430 mm |
Dimensions (mm)
| Overall dimension | 9,000×2,495×3,340 |
| Deck dimension | 7,000×2,300×1,500 |
| Kerb mass | 14,000kg |
| Number of axle | 4 |
| Tread (mm) | 2,065/2,065/1,860/1,860 |
| Wheelbase (mm) | 1,850+3,370+1,350 |
| Min. ground clearance (mm) | 255 |
| Crew | 3 |
Payload
| Axle load | Front: 7,500kg*2 Rear: 13,000kg*2 |
| Payload | 27,000kg |
| GVW | 41,000kg |
Electrical System
| Batteries | 2*12 Volt – 150 AH*2 |
| Alternator | 24 Volt/70A |
| Starter | 24 Volt/7.80kw |
Calculated Performance
| Max. Speed (km/h) | 75 |
| Max. Grade ability (%) | 30 |
| Min. turning radius (m) | 10 |
Frame (mm)
| Type | Parallel, tapered channel section type with reinforcements, stiffeners and cross members |
| Width (front/rear) | 940 and 850 |
| Height (front/rear) | 180 and 316 |
| Length | 8,700 |
Note: Materials and specifications are subject to change without notice.
Wheel Loader SWL30F92kw Deutz TD226B-6 engine
Power shift transmisison
1.7M3 bucket capacity:
3000kg rated load...
Wheel Loader SWL50E
160kw Cummins 6CTA8.3 engine
Hydraulic gear shift
3M3 bucket capacity:
5,000kg rated load ...
Backhoe Loader
Backhoe loader is also referred to as loader backhoe or just
backhoe. It is composed of a tractor, fitted with a shovel ...
Backhoe Loader WZ25-20This backhoe loader adopts an engine of well-known brand, which is reliable, powerful ...
Wheel Loader SWL3092kw Cummins 6BT5.9-C130 engine
Power shift transmission
1.7M3 bucket capacity: 3000kg rated load ...
On these pages contains road construction machines and equipments such as asphalt paver, motor grader, crawler bulldozer, road roller etc. and construction machines and equipments as wheel loader, crawler loaders, backhoe loader, and other heavy duty equipments as concrete mixer truck, stone crusher, and heavy crushing machines.
The website is supported by ETW INTERNATIONAL (called ETW), all the products are cited www.etwinternational.com, ETW strictly checks the conditions of enterprises which want to use ETW to promote markets. As they must have their own factories to produce the products they want to sell through ETW, must be registered by Government and have no bad recorders.
ETW offers 18 languages for users easily and crystal clearly understand what the sellers talk about the products and companies. If you can not find what you want here, click the links to use ETW INTERNATIONAL WITH 18 LANGUAGIES.